Skip to main content

Painting The Benchwork

Last night I ran back to my Home Depot and bought a quart of paint.  I wanted to give the door a basecoat instead of just a plain wood color.  I also knew that I wanted something light enough so I can still see my pencil markings but provide a foundation color for when I do start on some scenery.  I elected to go with a very light brown color.

I took my time today and applied three coats to the benchwork.  I probably did not need that many but I wanted it to look nice and smooth.  I still have enough paint left over to also use on modules for when I get into T-Trak.


Coat #1


Coat #2


Final coat is dry.
Labels:

Comments

Post a Comment

Popular posts from this blog

Starting The Benchwork

I am not much of a woodworker and I knew cutting plywood and 1x4’s with my limited tools would be very tedious.  So I needed to come up with another way to build my benchwork.  I remembered back to one of my previous layout attempts and that I purchased a hollow door from store.  That door back then was only 30” wide so I needed to see if could find one that is 36” wide.  Sure enough my local Home Depot sells 36”Wx80”L for around $38.00, I thought that would work perfect and save me some time.   So now the trackboard is set and I needed to think how I was going to wire the layout.  Having the board sit right on top of the bar would not allow me to do my wiring underneath the board.  I decided to purchase a 1x4 abd cut 4” blocks to use as legs.  I figure the blocks just being used as legs my cuts do not have to be perfectly straight, a jigsaw would work. My next issue is my bar top is made of tile.  I thought the wood block would probably easi...
Post a Comment
Read more

Ballasting The C&NW Layout

After watching plenty of videos on YouTube on ballasting N scale and specifically KATO Unitrack, it was now time to get it done on my C&NW layout. Growing up and attempting previous model railroads, ballasting was always an issue for me, but with the help of the internet, I think I finally got it right. There are plenty of YouTube videos on it now and I elected to go with the following approach. Items needed: Ballast White Glue Isopropyl Alcohol Scenic Cement Baby Spoon Craft Paint Brushs Eye Droppers Steps: I applied Elmer’s Glue-All full strength (white glue) on the edges of the Unitrack and a little on the trackboard. With a craft flat paint brush, I spread the glue evenly. I used a baby spoon to distribute the ballast over the edges of the track.  The baby spon allowed a bit more control to apply the ballast. With a fine paint brush, I cleaned up any ballast that was built up on the ties. With a wider flat paint brush, I brushed up at an angle any ballast on the track board...
Post a Comment
Read more

C&NW #928 EMD SD40 Locomotive

Well the last couple of days I have really been giving our USPS lady a workout, packages and packages arriving for my layout.  I added another diesel freight locomotive to the roster with a KATO Chicago & North Western #928 SD40.  This model I had purchased used through a Facebook Group and already equipped with DCC. The following is borrowed from  Don’s Depot . 928 was built in September 1966, #32099, FN 7912-8, as CGW 408. It became C&NW 928 in 1968. It was retired on September 25, 1987 and sold to Washington Corporation in November 1989.  It was rebuilt for Corporate Leasing Inc as 3001. It then became MRL 3001 and was later renumbered 220. It was later transferred to I&M Rail Link as 220 in 1997 and sold as Iowa Chicago & Eastern 220 in July 2002.  It was retired in February 2007 and scrapped by Jabco Industrial in March 2007.
Post a Comment
Read more